Hot

PID Auto Tune Temperature Controller

  • Temperature Input: RTD Pt100
  • Programmable Sterilization Timer with Guaranteed Soak Time
  • High-Temperature Safety Alarm
  • Computed Saturated Steam Pressure Display
  • Independent Purging and Sterilization Set-points
  • Independent Outputs for Air Valve & Steam Control
  • Front Key for Sterilization Cycle Reset & Start Command
  • Water Level Low Switch Input
  • DIN Standard Dimensions: 96(H) X 96(W) X 55(D), mm”
Availability: Available on backorder
ModelPUR-9D
Display
Display MethodUpper: 4 digits, 0.56” Bright White 7 Segment LED, Display
Lower: 4 digits, 0.39” Green 7 Segment LED Display.
Status Indicators3 Red LEDs (3mm ) Heater/Air Valve/Alarm
Keys
Type4+1 Tactile Switches
FunctionsON/OFF, SET, DOWN, UP, ENTER
Sensor Input
TypeRTD (Pt100), 3 wire
Display Range000.0 to 150.0’C
Display Resolution 0.1’C
Accuracy± 0.25% of reading ± 1°C
Sterilization Timer
Operation ModeSoak Time at Sterilization Setpoint with Hold Band
Range1 to 999 Minutes
Power-fail RecoveryResume, Reset, Abort
Sterilization Control
TypeON-OFF
ModeHeat Control
Control ParametersSterilization Setpoint, Hysteresis
Output (OP-1)Relay Change-over Contacts or SSR Drive ( Factory Set)
Air Purging Control
Control TypeON-OFF
Control ParametersAir Outlet Setpoint
Output (OP-2)Relay Change-over Contacts or SSR Drive ( Factory Set)
Alarms
FunctionsHigh-Temperature Deviation, End-of-Sterilization, Low Water Level
Output (OP-3)Relay Change-over Contacts
Outputs
RelayContact Type    : Potential-free Change-over Contacts Contact Rating : 3A Resistive @ 120/240 Vac
Contact Life      : > 5,00,000 Operations at Rated Voltage / Current
Power Supply
TypeLinear PSU
Line Voltage230VAC, 50/60Hz                 Optional: 18~36 VDC
Consumption5VA Max
Physical
MountingPlug-in with Panel Mounting Clamps
Overall Dimensions96(H) X 96(W) X 55(D), mm
Panel Cutout92(H) X 92(W), mm
Environmental
Operating Ambient0~55°C & 5~90%RH Non-condensing
Storage Temperature-10 to +70°C

 

Download PDF File