Hot
LCD Based Single CH-Auto Clave Controller
- Temperature Input: RTD Pt100
- Programmable Sterilization Timer with Guaranteed Soak Time
- High-Temperature Safety Alarm
- Computed Saturated Steam Pressure Display
- Independent Purging and Sterilization Set-points
- Independent Outputs for Air Valve & Steam Control
- Front Key for Sterilization Cycle Reset & Start Command
- Water Level Low Switch Input
- DIN Standard Dimensions: 96(H) X 96(W) X 55(D), mm”
- Specification
- Download
| Model | PUR-9D |
| Display | |
| Display Method | 16×2 Line Alphanumeric LCD |
| OutPut Indication | 3 Red LEDs (3mm ) Heater/Air Valve/Alarm |
| Keys | |
| Type | 4+1 Tactile Switches |
| Functions | ON/OFF, SET, DOWN, UP, ENTER |
| Sensor Input | |
| Type | RTD (Pt100), 3 wire |
| Display Range | 000.0 to 150.0’C |
| Display Resolution | 0.1’C |
| Accuracy | ± 0.25% of reading ± 1°C |
| Sterilization Timer | |
| Operation Mode | Soak Time at Sterilization Setpoint with Hold Band |
| Range | 1 to 999 Minutes |
| Power-fail Recovery | Resume, Reset, Abort |
| Sterilization Control | |
| Type | ON-OFF |
| Mode | Heat Control |
| Control Parameters | Sterilization Setpoint, Hysteresis |
| Output (OP-1) | Relay Change-over Contacts or SSR Drive ( Factory Set) |
| Air Purging Control | |
| Control Type | ON-OFF |
| Control Parameters | Air Outlet Setpoint |
| Output (OP-2) | Relay Change-over Contacts or SSR Drive ( Factory Set) |
| Alarms | |
| Functions | High-Temperature Deviation, End-of-Sterilization, Low Water Level |
| Output (OP-3) | Relay Change-over Contacts |
| Outputs | |
| Relay | Contact Type : Potential-free Change-over Contacts Contact Rating : 3A Resistive @ 120/240 Vac Contact Life : > 5,00,000 Operations at Rated Voltage / Current |
| Power Supply | |
| Type | Linear PSU |
| Line Voltage | 230VAC, 50/60Hz Optional: 18~36 VDC |
| Consumption | 5VA Max |
| Physical | |
| Mounting | Plug-in with Panel Mounting Clamps |
| Overall Dimensions | 96(H) X 96(W) X 55(D), mm |
| Panel Cutout | 92(H) X 92(W), mm |
| Environmental | |
| Operating Ambient | 0’C to 55’C |
| Storage Temperature | -10 to +70 °C |
| Operating Humidity | 5~80%RH Non-condensing |
| EMC Standard | EN50081-2 & EN 50082-2 Generic Stds for Industrial Environment |
| Safety Standards | Meets EN61010, Installation Catagory II |
Download PDF File
