Programmable 2CH-Mobile Concrete Batch Weighing Programmer Logger-HBP-2LP
Programmable 2CH-Mobile Concrete Batch Weighing Programmer Logger
- Specification
- Download
| Model | HBP-2LP |
| Over All Size | 144*144*130 mm |
| Cut Out | 140*140 mm |
| Mounting Type | Panel Mounting |
| Performance | a) Excitation Voltage: 5 VDC fixed, short circuit proof. |
| b) Load Current : 150mA Max. | |
| c) Coversion Rate : 20 samples /seconds. | |
| d) Filtering: By Digital Signal Processing. | |
| e) A/D converter: High Speed 20 Bit delta-sigma. | |
| f) ADC Resolution : 80000 counts | |
| g) Sensitivity : 0.02micro volt/count. | |
| h) Linearity : <0.01% of F.S /’C | |
| i) Signal I/P Range : -0.5mv/V to 3.5mV/V | |
| j) Indication Range: Max 9999 Kg. | |
| l) Calibration Method One touch by keypads. | |
| Display Method | Jumbo size Alphanumeric 16×2 Line Green Backlit LCD |
| (9.5mm character Height) | |
| Status LED’s | Front 5-Red LEDs. |
| (a) Bin-1,2,3, (b) Water (c) Additive. | |
| Key Operation | 12-Function Keys |
| Analog I/P | 3-Load cell I/P |
| Digital Logic I/Ps. | 1) Opto isolated Logic I/P for system start.or Water Start. |
| 2) Proximity I/P as water Flow with +12VDC Ext.Supply.for sensor. | |
| DATA Memory Size | 500 Reading Max. |
| Storage System | Solid State NVRAM |
| DATA Transmission | Serial Printer Interface (EPSON LX-300+) (Optional) |
| USB PEN Drive (Optional) | |
| External Connector | DB 9-PIN Female Type. |
| Control Relay O/Ps | 5-Relay O/P of 1 C/O each (3Amp@230VAC) |
| (a) Bin-1,2,3, (b) Water (c) Additive. | |
| I/P Supply Voltage | 230VAC,50 Hz,+/-15%,(others on request) |
| EMC Standard | EN50081-2 & EN 50082-2 Generic Stds for Industrial Environment |
| Safety Standards | Meets EN61010, Installation Catagory II |
| Operating Ambient | 0’C to 55’C |
| Storage Temperature | -10 to +70 °C |
| Operating Humidity | 5~80%RH Non-condensing |
Download PDF File
