Hot
Programmbale 2- Load Cell I/P Universal Tensile Machine Programmer
Programmbale 2- Load Cell I/P Universal Tensile Machine Programmer.
- Specification
- Download
| Model | UTM-192-2Z |
| Over All Size | 192*96*80 mm |
| Cut Out | 188*92 mm |
| Mounting Type | Panel Mounting |
| I/P Supply | 230VAC,+/-15%,50Hz. (Others on Request) |
| Performance | a) Excitation Voltage: 5 VDC fixed, short circuit proof. |
| b) Load Current : 150mA Max. | |
| c) Coversion Rate : 20 samples /seconds. | |
| d) Filtering: By Digital Signal Processing. | |
| e) A/D converter : 24Bit delta-sigma. | |
| f) ADC Resolution : 65,000 counts | |
| g) Sensitivity : 0.02micro volt/count. | |
| h) Linearity : <0.01% of F.S /’C | |
| i) Signal I/P Range : -0.5mv/V to 3.5mV/V | |
| j) Load indication a) CH-1 : 000.00/000.0/0000 Kg.(DP.selectable) | |
| (2-channel) b) CH-2 : 000.00/000.0/0000 Kg (DP.selectable) | |
| k) Elongation indication : Max 999.9 mm | |
| l)Calibration Method: Digital calibration via the front keypad | |
| Display method | Alphanumeric 16×2 Line Blue Backlit LCD.(4.5m character heigh) |
| Status LED’s | 2-Red LEDs. |
| Key Operation | 8-Function Keys.(tactile feedback) |
| Analog I/P | 2-CH.Load cell I/P. |
| Digital Logic I/Ps. | 1-optoisolated Logic I/P for Elongation measurement |
| Sensor Exi.Supply | +12VDC |
| Control O/Ps | b) 1 C/O Relay O/P for Main Motor Forward. |
| c) 1 C/O Relay O/P for Main Motor Reverse. | |
| PC Interfacing | Isolated Serial RS232 O/P.(9-pin D- type connector) |
| PC I/F Software | UTM |
| EMC Standard | EN50081-2 & EN 50082-2 Generic Stds for Industrial Environment |
| Safety Standards | Meets EN61010, Installation Catagory II |
| Operating Ambient | 0’C to 55’C |
| Storage Temperature | -10 to +70 °C |
| Operating Humidity | 5~80%RH Non-condensing |
Download PDF File
